25A 72/96/110V PWM Solar Controller with LED Display

30A 48V PWM Solar Controller with LED Display Systematic voltage auto-identification Lightning protection

25A 72/96/110V PWM Solar Controller with LED Display

Product description

The controller applies to the solar net division system (independent system). It can control the electrical charge and discharge process automatically. The discharge process of the storage battery has been optimized thus it can increase the lifetime of the storage battery and improve the function of the system. The thorough electronic protection function can keep the controller away from damage when the users install it error or the system is in bug.

Function

1, Systematic voltage auto-identification

2, MCU design with high speed and excellent performance

3, Nice heat dissipation and electromagnetism compat design

4, PWM charging main circuit which increased the power using time thus leads to the longer lifetime of the system

5, The controller adopted the LCD liquid crystal display and doubles key human-computer interface, the integrated menu display and operation.

6, Humanized browse interface makes the operation more convenient.

7, Use the MOSFET switch, without any machinery switch

8, The intelligentize battery electric quantity indicator which makes the user check the battery working condition easier.

9, Plumbic acid seal, the alternation between the two colloid batteries.

10, The temperature conductor is installed outside which has the high precision temperature compensation

11, Electrical leakage storage function, without the repeated set which makes the usage convenient

12, The visual LED display which can let the user get to know the conditions of solar energy and the load.

13, The overcharge, discharge and overload protection; electronic circuit protection and the battery fraud connection protection.

14, Lightning protection.

The controller panel figure

    

Wiring figure

Controller installing and use

The controller should be installed firmly, the sizes are as follows:

Outline size and installing size figure:

1,Wire preparation: ensure the wire length firstly; try to minimize the wire length as much as possible to reduce the electricity loss after ensuring the install location.

2,Connect the storage battery first, note the positive and negative poles, and do not connect error. If connect error, the indict light of the controller do not have any signal. But it will not make any damage to the internal units of the controller. If connect right, the liquid crystal will have the initialized interface.

3, Connect the solar energy battery wire second, note the positive and negative poles, and do not connect error. If there exists light, the CHARGE light will light or blink after 10 seconds. If not, check the connection.

4, Connect the load at last, connect the LED light or DC load with the output positive and negative poles of the controller. Note the positive and negative poles, and do not connect error to prevent the equipment from been burnt.

LED Light Specification

LED	Model	Function	Figure
Charge	off	At night or battery is failed to connect	(1)
	Light normally	Normal charge	(3)
	Slow flash	Float charge	(4)
	Double flash	Daytime (no charge)	(1)
Protection	Red lamp in slow flash	Load line in under voltage or high voltage protection	(7)
	Red lamp in double flash	Load line short circuit protection	(6)
	Red lamp lights for long time	Load line over load protection	(5)
	off	normal work	(8)
	Dot light loop	The voltage of electric automatic identifying battery in the controller in medium

LCD light control specification

Press the button to turn on the light. The light will turn off if no button has been pressed within 60s to save the electricity. Press the button for over 4s, the LCD will turn off. Press the button for 4s again, the LCD will turn on.

Technology standard

System voltage	12V	24V	48V
System current	30A/50A/60A	30A/50A/60A	30A/50A/60A
No-load loss	<20mA	<20mA	<15mA
Solar energy input voltage	36V	55V	100V
Over voltage protection	16.5V±1%	33.0V±1%	66.0V±1%
Over voltage recovery	15.0V±1%	30.0V±1%	60.0V±1%
Balance charge voltage	14.6V±1%	29.2V±1%	58.4V±1%
Increase charge voltage	14.4V±1%	28.8V±1%	57.6V±1%
Float charge voltage	13.8V±1%	27.6V±1%	55.2V±1%
Charging return voltage	13.3V±1%	26.6V±1%	53.2V±1%
Over discharge protection voltage	11.1V±1%	22.2V±1%	44.4V±1%
Over discharge return voltage	12.8V±1%	25.6V±1%	51.2V±1%
Night identification voltage	3.0V±1%	6.0V±1%	12.0V±1%
Daytime identification voltage	7.0V±1%	14.0V±1%	28.0V±1%
Temperature cmpensation	-4.0mv/°C/2V
Over-load, short circuit protection	1.25 times rating current 30S; 1.5 times rating current 10S overload current protection ≥3 times rating current short circuit protection
Work temperature	-25°Cto+60°C
Protection degree	IP30
Outline size	150mm*135mm*63mm
weight	1.15KG

25A 72/96/110V PWM Solar Controller with LED Display